Production of pressure vessels in První železářská společnost Kladno

The list of company’s licences and certificates implies that the company has been certified as a producer of pressure vessels according to the following standards:

ČSN 69 0010
German HP0 / AD-Merkblatt standards
Det Norske Veritas standards for the production of pressure vessels, Class I and II for ships)
Austrian ÖNORM M7812-1 standards
Germanischer Lloyd standards
European Directive 97/23/EC (G, H, A, A1 modules) and corresponding Decree No.182/1999 Coll., to set out technical requirements for pressure equipment

The company operates sufficient technical and machinery equipment to be able to produce pressure vessels of the following dimensions:

Vessel shell diameter : 500 to 3 000 mm
Shell plate thickness: 4 - 60 mm
Section length: 3 000 mm
Total length of a vessel: 12 000 to 30 000 mm
Total weight of a vessel: up to 40 000 kg

We are experienced the most in making:

over-ground tanks (2.7 and 4.85 m3) used for storing liquid propane-butane; three-year serial production of the tanks according to ČSN 690010, ČSN 690012 for the local market
air-receivers used as central sources of pressed air (compressor chambers); volumes = 1 to 10 m3, pressures = 0.6 / 1.0 / 1.6 MPa
various types of receivers, adsorption vessels, namely for NH 3/R707/ ammonium; for usual parameters : pressure 16 to 32 bars / operation temperatures: -40/+50°C / volumes: 50 to 32,000 litres; the said receivers are usually designed, produced and accepted according to AD-Merkblatt, DNV and European Directive 97/23/EC.
heat exchangers (components of refrigerating sets) with pipes welded to tubeplates with diameters from 323 up to 2,400 mm × 1,500 to 8,000 mm; pipes - ø8×0.8 to ø25×2
Weld seams are checked in accordance with the appropriate standards (EN, ČSN, DIN etc.) or by radiographic test, ultrasonic test, or magnetic particles test and penetration test. We are fully equipped for construction testing and the initial pressure testing (water or air used as a medium).